BASIC OPERATIONS (CONT.)
©
American Audio
®
- www.AmericanAudio.us - Velocity Mp3™ Instruction Manual Page 21
EXITING A LOOP
- To exit a SEAMLESS LOOP, press the
OUT
BUTTON (2).
The
IN BUTTON (33)
and
OUT BUTTON (2)
LEDs
will remain on, but will stop flashing. Music playback will resume
normal play (Figure 18). The
IN BUTTON (33)
and
OUT BUTTON
(2)
LEDs will remain on to remind you that a loop is stored in
memory.
Figure 20
REPLAY LOOP
- The
RELOOP (1)
function allows you to
return to your stored loop at any time. The
IN BUTTON (33)
and
OUT BUTTON (2)
LEDs will indicate a loop is stored in memory,
and may be played at any time. To replay the loop, press the
RELOOP BUTTON (1) .
The
IN BUTTON (33)
and
OUT BUTTON
(2)
LEDs will again begin to flash indicating SEAMLESS LOOP
mode has been activated (Figure 19) and your stored loop will
immediately begin to play.
Stutter Effect:
You can use your loop to create a stutter effect.
When a loop is playing press the
IN BUTTON (33)
repeatedly to
create this effect.
Figure 21
11. EDITING A LOOP:
Please Note:
Only the end point of the loop may be edited. You may make your loop shorter or longer. Before
you can edit your seamless loop you obviously must first have created a seamless loop to edit. If you haven’t
created a SEAMLESS LOOP, follow the instructions in step 10 to create a loop. If a SEAMLESS LOOP has
already been created, press the
RELOOP BUTTON (1)
to activate your SEAMLESS LOOP (Figure 23) if it is not
already activated. To edit your seamless loop’s ending point:
Press the
OUT BUTTON (2)
to return to normal play from the
loops cue point. (Figure 18). This will disengage the SEAMLESS
LOOP mode and allows you to edit the loops ending point.
1)
Press the
OUT BUTTON (2)
again when you reach your new
ending point (Figure 19).
-
FOR A SHORTER LOOP:
Press the
OUT BUTTON (2)
at
sooner point in the track (Figure 19).
-
FOR LONGER LOOP:
Press the
OUT BUTTON (2)
at later
point in the track (Figure 19).
2)
Figure 22
