background image

V SERIES SPECS

Power supply: 

AC 100V, 50/60Hz (Japan)

     

AC 110V, 60Hz (Colombia)

     

AC 120V, 60Hz (U.S.A. and Canada)

     

AC 127V, 60Hz (Mexico)

     

AC 220V, 50Hz (Chile and Argentina)

     

AC 220V, 60Hz (Philippines and Korea)

     

AC 230V, 50Hz (Europe, New Zealand, South Africa, and Singapore)

     

AC 240V, 50Hz (Australia and U.K.)

MODEL:                                          V4002                                                    V5002                                                   V6002

Output Power: 

  1100W RMS per Channel @ 4 Ohms 1400W RMS per Channel @ 4 Ohms 1800W RMS per Channel @ 4 Ohms,

 

 

 

  1kHz, 0.1% THD   

 

       1kHz, 0.1% THD 

 

 

  1kHz, 0.1% THD

 

 

 

  700W RMS per Channel @ 8 Ohms   850W RMS per Channel @ 8 Ohms,  1100W RMS per Channel @ 8 Ohms,

 

 

 

  1kHz, 0.1% THD    

 

       1kHz, 0.1% THD           

             1kHz, 0.1% THD

 

 

 

  3200W RMS @ 4 Ohms,   

       4000W RMS @ 4 Ohms,                     5000W RMS @ 4 Ohms,

 

 

 

  1kHz, 1% THD (Bridged Mode)         1kHz, 1% THD (Bridged Mode)          1kHz, 1% THD (Bridged Mode)

Total Harmonic          Less Then 0.03% (20Hz - 20kHZ @    Less Then 0.03% (20Hz - 20kHZ @   Less Then 0.03% (20Hz - 20kHZ @

Distortion (THD):        8 Ohms                                               8 Ohms   

 

 

 

  8 Ohms

Frequency                  0/-0.5db; 20Hz-20KHz                      5Hz to 50kHz to -3dB                        5Hz to 50kHz to -3dB

Response:     

  0/-3dB; 5Hz - 60KHz 

 

        

Slew Rate:   

  40V/msec   

 

                  40V/msec 

 

 

 

  40V/msec

Damping Factor @     350   

 

 

 

        >300   

 

 

 

  >300

8 Ohm:  
Impedance:               30K Ohms Balanced 

 

        20K Ohms Balanced   

 

  20K Ohms Balanced

 

 

 

 15K Ohms Unbalanced   

        10K Ohms Unbalanced 

 

  10K Ohms Unbalanced

Dimensions   

  16.5” x 19” x 3.5”   

                  19” x 19” x 5.25” 

 

 

  19” x 19” x 5.25”

(LxWxH): 

 

  420 x 482 x 88mm  

 

        482 x 482 x 132mm   

 

  482 x 482 x 132mm 

Weight: 

 

   46lbs/20.8Kgs   

 

        79lbs/36Kgs   

 

 

   83lbs/37.3Kgs   

American Audio®  -  www.americanaudio.us  -  V Series™ Power Amplifier User Manual  Page 17

Содержание V4002



















Отзывы: