background image

Introduction: 

Congratulations and thank you for purchasing the American Audio

®

 SCD-100™ CD player. This CD 

player is a representation of American Audio’s continuing commitment to produce the best and high-
est quality audio products possible at an affordable price. Please read and understand this manual 
completely before attempting to operate your new CD player. This booklet contains important informa-
tion concerning the proper and safe operation of your new CD player.

Customer Support: 

American Audio

®

 provides a toll free customer support line, to provide set up help and answer any 

question should you encounter problems during your initial set up or operation. You may also visit us 
on the web at www.americandj.com for any comments or suggestions. Service Hours are Monday 
through Friday 9:00 a.m. to 5:30 p.m. Pacifi c Standard Time.

Voice:  

(800) 322-6337

Fax:

(323) 582-2610

E-mail: 

[email protected]

Caution! 

There are no user serviceable parts inside this CD player. Do not attempt any repairs your-

self, without being instructed to do so by an authorized American Audio service technician. Doing so 
will void your manufactures warranty. In the unlikely event your CD player may require service, please 
contact American Audio

®

 customer support.

Do not discard the packing carton in the trash. Please recycle when ever possible.

 INTRODUCTION

 UNPACKING

Every SCD-100™ has been thoroughly tested and has been shipped in perfect operating condition. 
Carefully check the shipping carton for damage that may have occurred during shipping. If the carton 
appears to be damaged, carefully inspect your CD player for any damage and be sure all equipment 
necessary to operate the CD player has arrived intact. In the event damage has been found or parts 
are missing, please contact our toll free customer support number for further instructions. Please do 
not return the CD player to your dealer without fi rst contacting customer support.

Please be sure to make any connections before plugging the CD player in to an electrical outlet. All 
fader and volume controls should be set to zero or minimum position, before the CD player is switched 
on. If the CD player has been exposed to drastic temperature fl uctuation (e.g. after transportation), 
do not switch on the CD player immediately. The arising condensation of water might damage your 
device. Leave the device switched off until it has reached room temperature.
Operating Determinations:
• When installing this CD player, please make sure that the device is not exposed or will not be 

exposed to extreme heat, moisture or dust!

• Do not operate the CD player in extremely hot (more than 30°/100°F) or extremely cold (less than 

5°C/40°F) surroundings. 

• Keep the unit out of direct sunlight and away from heaters.
• Operate the CD player only after becoming familiar with its' functions. Do not permit operation by 

persons not qualifi ed for operating the unit. Most damages are the result of unprofessional operation.

 SET-UP PRECAUTIONS

©

American Audio

®

   -   www.americandj.com   -   SCD-100™ Instruction Manual Page 7

Содержание SCD-100

























Отзывы: