American Audio SCD-100, Руководство по эксплуатации

Страница: 10 / 24

playing the time and track values. This display
is viewable at several comfortable angles as
described on pages 11 and 12. The LCD symbols
will be described in the next section.
5. SGL - This button allows the unit's play mode
to change between Single and Continuous. In
single mode the unit will play a single track and
return to cue mode. In continuous mode the unit
continues to play track by track and returns to
cue mode after all tracks have played. This func-
tion also operates in program modes. In program
mode the continuous function will play all tracks
in a program, than return to cue mode on the first
track in the program.
6. PROG. - (Program Button) This button is used
to enter Program Mode. The word “PROGRAM”
will be indicated in the
LCD DISPLAY (4) when
Program Mode is activated. For programming
information see “Programming” on page 19.
7. PROGRAM LED - This LED will glow while
programming or when the unit is playing in pro-
gram mode. See Programming on page 19.
8. LOOP LED - This LED will glow when the unit
is in loop mode. See Looping on page 18.
9. LOOP BUTTON - This button is used to acti-
vate a loop. See Looping on page 18.
10. PITCH LED -
This LED will glow when the
pitch function is activated. See PITCH on page
16.
11. POWER SWITCH - This switch is used to
control the unit's main power.
12. SHUTTLE WHEEL - (OUTER RING)
The
outer wheel of the jog shuttle is used as a fast
track search. The wheel has four forward and
four reverse speed positions for speed searching
through tracks. The more you turn the wheel in
either direction, the faster you search.
13. JOG WHEEL - (INNER WHEEL) The inner
wheel of the jog shuttle is serves two functions
depending on the current operating mode:
A. The jog wheel will act as a slow frame
search control when the unit is in pause or
cue mode allowing you to set a specific cue
point or find a particular starting point.
B. The inner wheel also works as a momen-
tary pitch bend during playback. Turning the
wheel clockwise will increase the pitch per-
centage up to 16%, and turning the wheel in
the counterclockwise direction will decrease
the pitch percentage up to -16%. The pitch
bend will be determined on how fast you
turn the wheel.
14. TRACK BUTTON -
This buttons is
used to select a track. Tapping this button will
back-skip to the previous track, holding down
this button will rapidly back-skip through the
tracks on a CD.
15. CUE LED -
This LED will glow when the unit
is in CUE mode. The LED will also flash every
time a new CUE POINT is set. See CUE on page
18.
16. CUE - Pressing the CUE button during play-
back immediately pauses playback and returns
the track to the last set cue point (see setting a
CUE POINT, page 18). The red
CUE LED (15) will
glow when the unit is in cue mode. The LED will
also flash every time a new CUE POINT is set.
17. + 10 -
This button instantly advances the
track selection by 10. For example if the unit
is cued on track one, pressing this button will
instantly advance to and cue track 11. If the but-
ton is pressed once more the unit will advance to
and cue track 21.
18. PLAY/PAUSE BUTTON - Each press of the
PLAY/PAUSE Button causes the operation to
change from play to pause or from pause to play.
While in play mode the green play LED will glow,
and while in pause mode the green play LED will
flash.
19. PLAY LED - While in play mode the green
play LED will glow, and while in pause mode the
green play LED will flash.
20. TRACK BUTTON -
This buttons is
used to select your desired track. Tapping this
button will forward skip to the next track, holding
down this button will rapidly forward skip through
the tracks on your CD.
FUNCTIONS AND CONTROLS
©
American Audio
®
- www.americandj.com - SCD-100™ Instruction Manual Page 10