(28)
must be in the "Line 3" position, to monitor any source connected to these jacks.
47. CHANNEL 4: RCA LINE INPUT JACKS -
These Jacks are used for line level inputs. Connect
CD players or Tape Decks to line level inputs. Line level musical instruments with stereo outputs
such as Rhythm Machines or Samplers should also be connected to line level inputs. The red col-
ored RCA jack represents the right channel input and the white represents the left channel input.
Input volume will be controlled by the channel four
fader
. Do not connect turntables to these jacks,
turntables should only be connected to “Phono” inputs.
48. REC OUT -
This is a low current unbalanced output source designed for various tape and CD
recorders. The Record Out (REC OUT) level is dictated by the
CHANNEL FADER LEVEL (23)
, it is not
influenced by the
MASTER VOLUME CONTROL (18).
49. RCA MASTER OUTPUTS -
The Master Output includes a pair
XLR BALANCED JACKS (53)
as well as a pair of RCA Unbalanced Jacks. The RCA jacks send a low current unbalanced output
signal. These jacks should only be used for shorter cable runs to signal processors or looping to
another mixer. For cable runs greater than 15 feet use the
XLR BALANCED JACKS (53).
50. PLAYER A CONTROL -
This jack is used to control the “Q-Start” function between the mixer
and a compatible American Audio
®
or American DJ
®
CD Player. Using the mini plug included with
your CD player, connect from the CD player controller out jack to this jack. Player A “Q-Start” func-
tionallity will be controlled by the left side (X) of the
CROSSFADER (21).
For more information on
“Q-Start” functionallity refer to the user manual included with your CD player. Be sure to only use
the mono tip mini plug included with your CD player to avoid damage to the mixer and/or the CD
player.
51. PLAYER B CONTROL -
This jack is used to control the “Q-Start” function between the mixer
and a compatible American Audio
®
or American DJ
®
CD Player. Using the mini plug included with
your CD player, connect from the CD player controller out jack to this jack. Player B “Q-Start” func-
tionallity will be controlled by the right side (Y) of the
CROSSFADER (21).
For more information on
“Q-Start” functionallity refer to the user manual included with your CD player. Be sure to only use
the mono tip mini plug included with your CD player to avoid damage to the mixer and/or the CD
player.
52. DIGITAL OUTPUT -
This jack is used to send a stereo digital output siginal to a digital input
device.
53. BALANCED XLR MASTER OUTPUTS JACKS -
The Master Output includes a pair of XLR
Balanced jacks as well as a pair of
RCA UNBALANCED JACKS (49)
. The 3-pin XLR jacks send a
high current balanced output signal. These jacks should be used when you will be driving an amp or
other audio equipment with a balanced input, or whenever you will be running a signal line greater
than 15 feet. Always, use these jacks whenever possible.
54. BALANCED TRS 1/4” ZONE OUTPUT JACKS -
The Zone Output includes a pair of TRS
Balanced jacks as well as a pair of
RCA UNBALANCED JACKS (36)
. The TRS jacks send a high
current balanced output signal. These jacks should be used when you will be driving an amp or
other audio equipment with a balanced input, or whenever you will be running a signal line greater
than 15 feet. Always, use these jacks whenever possible.
55. AC CONNECTION -
This connector is used to supply main power to the unit via the included
detachable power cord. The power connection uses an I.E.C. type connector, use only the supplied,
polarized AC power cord. Use only a power cord that matches this type of connection. Be sure to
only connect this unit to a power outlet that matches the printed power label on the unit. Never use
©
American Audio
®
- www.americanaudio.us - Q-FX19™ Instruction Manual Page 14
Q-FX19™
CONTROLS AND FUNCTIONS cont.
