“Q" START SWITCH activates the FADER “Q" START feature. When in the ON position, the FADER
“Q" START automatically returns the CD player to the preset CUE POINT.
For example; Assuming you have two compatible American Audio™ CD players or a
compatible dual CD player connected to channels one and two. When the Fader "Q" Start option
is turned on, sliding the crossfader to the far left position will trigger playback on CD player
1. When the crossfader is pushed to the far right position, playback on CD player 2 will
begin, and CD player 1 will return to the cue position. Refer to your American Audio CD
player user manual for setting CUE POINTS. Turn the ON/OFF SWITCH to the OFF
position to disengaged “Q” Start function and resume to a normal fader.
25. CROSSFADER CURVE ADJUSTMENT -
This rotary knob is used to change the way the cross-
fader will operate. The crossfader can operate in different modes, “NORMAL CURVE”, “QUICK
CURVE” or any variation of the two. (Quick Curve usually used for scratching).
26
.
MIC 2 VOLUME CONTROL -
This knob controls the output volume of
MICROPHONE 2 (39).
However, master volume is controlled by the MASTER VOLUME CONTROL (18).
27
.
MIC 1 VOLUME CONTROL -
This knob controls the output volume of
MICROPHONE 1 (1).
However, master volume is controlled by the
MASTER VOLUME CONTROL (18).
28. SOURCE SELECTOR SWITCH -
These switches are used to select the input source assigned to
each channel. Each channel may only be assigned one input source at a time. This switch must be in
the “phono” position for turntable operation.
29. TALKOVER CONTROL -
This function decreases all signal output except the microphone signal.
The amount of decrease is preset to -14dB and is not user selectable.
30
.
MICROPHONE BASS CONTROL -
This knob is used to adjust the low frequency levels of the micro-
phone with a maximum signal gain of 12dB or maximum signal decrease of -12dB. Turning the knob in
a counter-clockwise direction will decrease the amount of bass applied to the microphone signal, turn-
ing the knob in a clockwise direction will increase the amount of bass applied to microphone signal.
31
.
MICROPHONE MIDRANGE CONTROL -
This knob is used to adjust the midrange levels of the micro-
phone with a maximum signal gain of 12dB or maximum signal decrease of -12dB. Turning the knob in a
counter-clockwise direction will decrease the amount of midrange applied to the microphone signal, turn-
ing the knob in a clockwise direction will increase the amount of midrange applied to microphone signal.
32
.
MICROPHONE TREBLE CONTROL -
This knob is used to adjust the treble levels of the
Microphone with a maximum signal gain of 12dB or maximum signal decrease of -12dB. Turning the knob
in a counter-clockwise direction will decrease the amount of treble applied to the microphone signal,
turning the knob in a clockwise direction will increase the amount of treble applied to microphone signal.
©
American Audio
®
- www.americanaudio.us - Q-FX19™ Instruction Manual Page 11
Q-FX19™
CONTROLS AND FUNCTIONS cont.
