©
American Audio
®
- www.AmericanAudio.us - Encore 1000 Instruction Manual Page 16
GENERAL FUNCTIONS AND CONTROLS (Cont.) CD PLAYER LCD
E. LCD DISPLAY PANEL (FIGURE 7)
41. CUE INDICATOR -
This indicator will glow when the unit is in CUE or PAUSE mode and will flash every time a new
CUE POINT is set.
42. FOLDER INDICATOR -
This indicator details the current selected folder.
43. TIME BAR INDICATOR -
This bar gives a visual approximation of a track's or disc's remaining time. This bar will begin
to flash when a CD is ending.
44. TIME DISPLAY -
These indicators detail the Minutes, Seconds, and Frames. The meter will display either the elapsed
or remaining time of a track.
45. AUTO BPM ICON & METER -
The AUTO BPM icon is lit indicating that AUTO BPM meter is active. The meter will
meaure the beats per minute (BPM).
46. PITCH METER -
This meter will display the pitch percentage applied by the PITCH SLIDER (5) or PITCH BEND BUT-
TONS (8).
47. LOCK INDICATOR -
Appears and flashes when the player lock is activated.
48. LOOP -
This icon will appear when a loop point is set.
49. RELOOP INDICATOR -
Appears and flashes when a LOOP is active.
50. AUTO CUE -
This will indicate if the Auto Cue is on or off. Press and hold the SGL/CTN (4) for 1 sec. to turn the Auto
Cue function on and off.
51. KEY INDICATOR -
This indicator will glow when the touch sensor part of the jog wheel has been touched.
52. CHARACTER DISPLAY -
This will display the name of the track, folder, and album when a Mp3 disc is loaded.
53. ELAPSED/TOTAL REMAIN/REMAIN INDICATOR -
This indicator is in direct reference to the TIME METER (44).
When the ELAPSED indicator is displayed in the LCD (16), the time defined will refer to a single track's elapsed time. When
"REMAIN" is indicated in the LCD DISPLAY (16) the TIME DISPLAY (44) in the LCD will define the current track's remaining
time. When "TOTAL REMAIN" is indicated in the LCD DISPLAY (16) the TIME DISPLAY (44) in the LCD will define the total
disc remaining time (for CD only). The time mode is changed by the tapping on the TIME BUTTON (3).
54. RANDOM INDICATOR -
This indicator will glow when RANDOM mode is activated.
55. REPEAT INDICATOR -
This indicates that the repeat function is activated. When the repeat function is activated, the
current track playing will repeat itself until the REPEAT function is deactivated.
56. SINGLE INDICATOR -
This indicates that the CD drive is in single play mode, the track will play once and return to
CUE mode. If the single indicator is not on the unit is in continuous mode. In continuous mode the drive will play all the
remaining tracks on the disc.
57. TRACK INDICATOR -
This indicator details the current track. The number displayed in the track indicator is a direct
reference to the track in play, pause, or cue mode.
58. PLAY/PAUSE INDICATOR -
Either the play or pause indicator will glow depending which mode you are in.
Figure 7
41
52
50
48
47
45
44
43
42
49
46
55
54
56
53
51
57
58
