©
American Audio
®
- www.AmericanAudio.us - CDG-350 Instruction Manual Page 12
LIQUID CRYSTAL DISPLAY (LCD)
LCD DISPLAY (FIGURE 7)
37. KEY INDICATOR -
Indicates current tracks' half-step increments, up to 12 steps + (#) or - (b) from
the orignal key.
38. SINGLE INDICATOR -
This indicates the unit is in single play mode. In single play mode, the unit
will play a single and return to CUE mode.
39. TOTAL REMAIN INDICATOR -
This indicator is in direct reference to the TIME METER (44, 45, &
46). When the TOTAL REMAIN indicator is displayed in the LCD (8), the time defined will refer to the
entire discs' remaining time. The time mode is changed by tapping on TIME BUTTON (5).
REMAIN INDICATOR -
This indicator is in direct reference to the TIME METER (44, 45, & 46).
When the REMAIN indicator is displayed in the LCD (8), the time defined will refer to a single track's
remaining time. The time mode is changed by tapping on TIME BUTTON (5).
ELAPSED INDICATOR -
This indicator is in direct reference to the TIME METER (44, 45, & 46).
When the ELAPSED indicator is displayed in the LCD (8), the time defined will refer to a single track's
elapsed running time. The time mode is changed by tapping on TIME BUTTON (5).
40. # INDICATOR -
This indicates that you are raising the key in half-step increments.
41.
b
INDICATOR -
This indicates that you are lowering the key in half-step increments.
42. PITCH METER -
This meter displays the pitch percentage being applied to playback by the PITCH
SLIDER (13). If the meter read zero regardless of the PITCH SLIDER'S (13) position, the PITCH (10)
function is not activated.
43. TIME BAR INDICATOR -
This bar visually details the time defined in the TIME METER (44, 45, &
46). As with the TIME METER (44, 45, & 46), this bar is also dependent on the selected time function
REMAIN, TOTAL REMAIN, OR ELAPSED (39). This bar will begin to flash when 15 seconds of a track
remain and will begin to rapidly flash when three seconds of a track remain. The flashing bar is a great
visual reminder a track is about to end. The flashing bar will function regardless of which time mode
the unit is in.
44, 45, 46. TIME DISPLAY -
These indicators detail the Minutes, Seconds, and Frames. The meter will
display either the elapsed, total, or remaining time of a track or disc. The time displayed in the meter
will directly reflect the time indicator above
TOTAL REMAIN, REMAIN, OR ELAPSED (39).
47. PROGRAM INDICATOR -
This icon indicates "Program Mode" is activated. See Program Play on
page 18 for more information on programing.
Figure 7
40
45
44
42
43
41
39
38
37
49
50
48 47 46
51
