©
American Audio
®
- www.AmericanAudio.us - CDG-350 Instruction Manual Page 15
BASIC OPERATIONS
7.
FRAME SEARCH
This feature allows you to scroll through a track frame by frame, allowing you to find and set a start-
ing cue or loop point. To use the scroll function you must first be in Pause Mode or Cue Mode. Once
you are in Pause or Cue mode, turn the
SHUTTLE WHEEL (17)
to scroll through the track (Figure 10).
Turning the wheel in a clockwise direction will advance the frame search and turning the wheel in a
counter-clockwise direction rewinds the frame search. When you use the
SHUTTLE WHEEL (17)
the
monitor (headphone level) function allows you to here what you are scrolling through. Once you reach
your desired starting point you can set a cue (starting) point by pressing the
PLAY/PAUSE BUTTON
(14)
. Pressing the
CUE BUTTON (15)
will now return you to the point you just set.
Figure 10
8. CHANGING THE TIME DISPLAY (44, 45, & 46)/TIME BAR (43):
The time may be displayed in three different modes; Elapsed, Remain, and Total Remain. During nor-
mal playback, pressing the TIME BUTTON (5), will change the time display information (44, 45, & 46)
in the LCD (8). The following is a break down of the time settings and their definitions:
1) TOTAL REMAIN (39) - This details the time in the
LCD (
44, 45, & 46) as the current cds’ total
remaining time.
2) REMAIN (39) - This details the time in the
LCD (
44, 45, & 46)
as the current tracks’ remaining run-
ning time.
3) ELAPSED (39) - This details the time in the
LCD (
44, 45, & 46)
as the current tracks’ elapsed run-
ning time.
TIME BAR INDICATOR - The time bar in the LCD (8) visually details the time defined in the TIME METER
(44, 45, & 46). This bar is also dependent on the selected time function ELAPSED (39), REMAIN (39) or
TOTAL REMAIN (39). This bar will begin to flash when 15 seconds of a track remain and will begin to
rapidly flash when three seconds of a track remain. The flashing bar is a great visual reminder a track
is about to end. The flashing bar will function regardless of which time mode the unit is in.
