Get Connected
If you have purchased the optional programming kit you will receive a
programming kit that enables you to adjust your own instruments or make
remote adjustments via the internet. If you have not, you may do so by
contacting our Customer Service Group.
Note: Before launching America Hears software you have to connect your
hearing instruments to your programmer and the programmer to your
computer. If you need any assistance in this process please do not hesitate to
call one of our customer service representatives.
FreedomAD SIE hearing aids use a flex connector to connect the programming
cord to the hearing instruments.
•
Align the red dots on the flex connector and the programming cable.
•
Connect the programming cable to the flex connector.
•
Open the battery door slightly to create a space on the
hinged side
of the
battery door.
•
Insert flex connector into the space created on the
hinged side
of the battery
door of the hearing instrument. Insert the red plug/flex connector into the right
hearing aid and the blue plug/flex connector into the left hearing aid. Do not try
to force this connection.
Note: The gold shiny side of the ribbon must be facing away from the battery
compartment.
•
Close the battery door.