Amer WAP223NC, Быстрая установка

Страница: 6 / 19

QIG 2012
Next, plug the Ethernet cable into the power adapter port labeled LAN
then insert the cable’s other end into your
existing switch or router with Internet
connectivity. Lastly, connect the power cable
for the 24V PoE power adapter into an outlet
and power up the adapter.
There is no further setup necessary, as long
as the AP can access the Internet. The AP
will automatically self configure and be ready
to use in several minutes. You can
reconfigure it to a static IP using the
CloudCommand interface anytime in the future.
Note1: For network firewalls, use the following OUTBOUND traffic on
ports: 53(DNS), 80(HTTP), 443(HTTPS), and 3478(STUN) . These settings
are standard defaults for the large majority of firewalls.
Note2: If content filtering and network traffic monitoring software are in
use, ensure the following entries are whitelisted:
‐ 107.20.199.144
‐ http://amer.cloudcommand.com + https://amer.cloudcommand.com
‐ http://u01.cloudcommand.com + https://u01.cloudcommand.com
‐ 23.21.195.45
‐ http://time.cloudcommand.com