61
CPA/TCPA
CPA (nm)
TCPA (min)
[05 ]
[ 10 ]
Save data?
YES
NO
MENU
MESSAGES
AIS STATUS
SHIP SETTING
SYS CONFIG
INITIAL
MAIN MENU
TRANSCEIVER
ALARM
<OFF>
Step 5:
When the set up is completed, press the <ESC> or <ENT> key and a pop out window
will appear to confirm and save the setting.
Step 6:
Select “YES” to confirm and save the data or “NO” to escape this menu.
*NOTE:
MMSI can only be entered ONCE. Make sure that the MMSI is correct before entering
it.
5.6.3 CPA/TCPA Settings (User Password Protected)
Step 1:
Select the
“CPA/TCPA” function.
Step 2:
A password is required. Enter the password in the pop out window.
Step 3:
On the
“CPA/TCPA” page, CPA (Closest Point of Approach) in nm and TCPA (Time to
Closest Point of Approach) in minute can be set.
Step 4:
Press the <ESC> or <ENT> key to confirm again and a pop out window will appear.
Step 5:
Select “YES” to confirm and save the data or “NO” to escape this menu.
INITIAL
PASSWORD
MMSI
CPA/TCPA
