INSTRUCTION MANUAL
& PARTS BREAKDOWN
AME INTERNATIONAL - 6 - WWW.AMEINTL.NET
TYRE REPAIR EQUIPMENT
TYRE
INSTALLATION
1.
Place main body of this product on solid ground and keep its flat.
(Expansion blots are recommended)
，
and to connect the roller
support with the pillar.
2. Put Spread hook set2 into locating hole of the Roller support, use circlip
at the end of the hook sets to fix it on the supporting base, shown
as pictures.
3. Pull down the ball handle of the adjustable bar of sliding bush, and
put the spread hook set1 into the roller support to the appropriate
hole.
TYRE REPAIR EQUIPMENT
TYRE
SPREADER
Shown as picture.
Operation
1.
Before starting the machine, check carefully whether the
fasteners on the machine are loose or not due to transportation.
If yes, must be re-tightened before using.
2.
Put the tire on the roller sets, and adjust the distance between
the two hooks according to tire dimension.
a.
Adjusting spread hook set1: Pull down the ball handle of the
adjustable bar of slide bush and choose appropriate hole to locate.
b.
Adjusting spread hook set2: Choose appropriate hole and height.
3. Fix the tire on the spreader; put the hooks into the tire by
hand.
4. Pull the handle and spread the tire, lock the hook with locking
plate.
