INSTRUCTION MANUAL
& PARTS BREAKDOWN
AME INTERNATIONAL - 3 - WWW.AMEINTL.NET
To avoid serious personal in-
jury, always wear proper pro-
tective gear, such as hard
hats, safety glasses, gloves,
and steel toe shoes when us-
ing hydraulic equipment.
Failure to chock the wheels
and crib the vehicle can re-
sult in Serious injury or
death.
Always deflate tires
before removing a wheel, a
rim, or part of a rim clamp or
nut. If you do not deflate the
tire, the tire could explode,
causing serious injury of
death.
Always stand to one
side of the rim when using
the bead breaker
.
Standing to
one side of the bead breaker
allows you to maintain con-
trol of the bead breaker. If it
is not seated properly and
flies off the rim, the bead
breaker could cause serious
injury or death.
AME INTERNATIONAL
WWW.AMEINTL.NET
! WARNING !
- 2 -
IMPORTANT RECEIVING INFORMATION
Visually inspect all parts for shipping damage. If you find shipping dam-
age, notify the carrier at once. Shipping damage is not covered by your
warranty. The carrier is responsible for all costs of replacement or repair
caused by shipping damage.
DESCRIPTION
The
73080 Floor Mount Tire Spreader is equipped with multiple height
and width adjustments. It is for use with passenger and light trucks (13”
– 20”). Heavy duty rollers cradle the tire. Weight: 63 lbs (29 kg).
SAFETY INFORMATION
To avoid personal injury or property damage while using this product,
read and follow all
DANGERS, WARNINGS, CAUTIONS,
and
IN-
STRUCTIONS
that are attached to, or included with, this product.
1. Follow the instructions of the tire manufacturer and the vehicle
manufacturer when deflating, demounting, mounting, and inflating
tires.
2. These operating instructions do not apply to any specific rim. There-
fore, contact the rim manufacturer for the correct procedure for your
rim.
3. For the publication, “Multipiece Rim Matching Chart” contact the
United States Department of Labor, Occupational Safety, and Health
Administration (OSHA), Washington, DC, 20210, 202-219-6091, or
contact AME Intl at
1-877-755-4263
. If you are outside the U.S., con-
tact your local government officials.
4. AME Intl cannot be held responsible for damage or injury resulting
from unsafe use of this product; lack of maintenance; or incorrect
product and system application.
5. Contact AME Intl. when in doubt about safety precautions or applica-
tions.
The
floor mount tire spreader
, and all tire tools, should be used
only by per-sons properly trained according
to OSHA Regulation
#29CFR1910.177, “Servicing Single-Piece & Multi-Piece Wheels.”
Free copies of this regulation are available upon request from AME
Intl.
WARNING
INSTRUCTION MANUAL
To avoid serious personal injury, always wear proper protective gear,
such as hard hats, safety
glasses, gloves, and steel toe shoes when using
hydraulic equipment.
CAUTION
TYRE REPAIR EQUIPMENT
TYRE
SPREADER
CAUTION
l
Before using the product, insure that carefully read and fully
understand the instructions manual and all stickers noted on the
product. This is necessary to avoid injury to the operator and damage
to the product.
l
Use this product only for spreading tire and repairing the tire
protective wrap. Do not use this product for any other purpose. Our
company will not be responsible for the problems caused by any
improper operations.
l
Keep the hooks and claws of machine clean during working, Clean the
extraneous matter such as grease in order to avoid injury to the
operator caused by sliding.
l
Do not use this product if it is visibly worn, distorted or damaged,
deal with it according to the local rules and regulations on waste
treatment.
l
In order to avoid hurting the eyes by the sundries, this machine must
be operated by the professionals who wears appropriate eye
protection during the whole repairing process.
