INSTRUCTION MANUAL
& PARTS BREAKDOWN
AME INTERNATIONAL - 5 - WWW.AMEINTL.NET
TYRE REPAIR EQUIPMENT
TYRE
SPREADER
1. Spread hook sets1
2. Sliding bush
3. Locking plate
4. Spread hook sets2
5. Roller
6. Turnplate
7. Guiding pole
8. Pressure spring
9. Foot board
10. Base
11. Roller support
12. Adjustable bar of
sliding bush
TYRE REPAIR EQUIPMENT
TYRE
INSTALLATION
1.
Place main body of this product on solid ground and keep its flat.
(Expansion blots are recommended)
，
and to connect the roller
support with the pillar.
2. Put Spread hook set2 into locating hole of the Roller support, use circlip
at the end of the hook sets to fix it on the supporting base, shown
as pictures.
3. Pull down the ball handle of the adjustable bar of sliding bush, and
put the spread hook set1 into the roller support to the appropriate
hole.
TYRE REPAIR EQUIPMENT
TYRE
INSTALLATION
1.
Place main body of this product on solid ground and keep its flat.
(Expansion blots are recommended)
，
and to connect the roller
support with the pillar.
2. Put Spread hook set2 into locating hole of the Roller support, use circlip
at the end of the hook sets to fix it on the supporting base, shown
as pictures.
3. Pull down the ball handle of the adjustable bar of sliding bush, and
put the spread hook set1 into the roller support to the appropriate
hole.
1
3
2
4
11
12
7
5
6
9
10
8
