Chapter 1
Introduction
The Xilinx
®
T2 Telco accelerator card, shown in the following figure, is a single slot, half height,
half length (HHHL) plug-in card. It is compliant with PCI Express
®
technology, supporting PCIe
Gen3 x16 and Gen4 x8 bifurcated rates on the host interface.
Figure 1: T2 Telco Accelerator Card
The card features a 16 nm Zynq
®
Ult™ RFSoC ZU48DR device supporting the following
targeted applications:
• 5G NR physical layer functional offload, including but not limited to:
○
Low-density parity check (LDPC) encoding and decoding
○
Rate matching and dematching
○
Code block (CB) and CB group (CBG) processing with HARQ buffer management logic in
lookaside mode
• 4G LTE physical layer functional offload, including but not limited to:
○
Turbo encoding and decoding
○
Rate matching and dematching
Chapter 1: Introduction
UG1496 (v1.0) June 15, 2022
T2 Telco Accelerator Card User Guide
3