SD188ES/SD188EM Demonstration Board User’s Manual
1-2
1.1
Connecting to a PC
Follow the steps below to connect the SD188ES/SD188EM demonstration board
to your PC.
Installation Requirements
The items listed below are necessary to install and run the SD188ES/SD188EM
demonstration board:
• PC with an available COM port
• Terminal emulation software (such as Microsoft Windows
®
Terminal or
ProComm Plus) that supports ASCII file transfers, software flow control (Xon/
Xoff), and send break capability
• Power source for universal power supply
Board Installation
1. Remove the board from the shipping carton. Visually inspect the board to verify
that it was not damaged during shipment.
!
CAUTION: As with all computer equipment, the
SD188ES/SD188EM demonstration board may be
damaged by electrostatic discharge (ESD). Please take
proper ESD precautions when handling any board.
frtbook : ch1 Page 2 Monday, June 2, 1997 3:37 PM