AMD 780G Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 54

AMD 780G Скачать руководство пользователя страница 37

33

you must leave this item disabled.

Assign IRQ For USB

Names the interrupt request (IRQ) line assigned to the USB on your system. Activity ofthe
selected IRQ always awakens the system.

Resources Controlled By

BIOS can automatically configure all the boot and plug and

play compatible devices. If you choose Auto, you cannot select IRQ DMA and memory base
address fields, since BIOS automatically assigns them.

3-10 PC Health Status

This section shows the Status of you CPU, Fan, and Warning for overall system status. This
is only available if there is Hardware Monitor onboard.

Phoenix – AwardBIOS CMOS Setup Utility

PC Health Status

Item Help

Show PC Health in Past Enabled

Shutdown Temperature Disabled

Smart FAN Configuration Press Enter

VLDT 1.26V

VDIMM 1.95V

VCORE 1.35V

NBVCC 1.16V

CPU Temperature 38

°

C

SYS Temperature 80

°

C

CPUFAN Speed 2525 RPM

SYS FAN1 Speed 0 RPM

SYS FAN2 Speed 0 RPM

Menu Level >

↑↓→←

Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5:Previous Values F6:Optimized Defaults F7:Standard Defaults

Show PC Health in Post

During Enabled, it displays information list below. The choice is either Enabled or Disabled

Shutdown Temperature

This item can let users setting the Shutdown temperature, when CPU temperature over this
setting the system will auto shutdown to protect CPU.

PS CPU Smart FAN Configurations

CPU Full-Speed Temp

This item allows you setting the FAN works in full speed when the temperature over the value
which out set. If the temperature below the value but over the Idle Temperature, the FAN
will works over 60% of full speed, and the higher temperature will gain higher FAN speed,
after over the temperature which this item setting, the FAN works in full speed.
CPU Idle Temp
This item allows you setting the FAN works in 60% of full speed, when the temperature
lower than the temperature which you setting.

CPU Temperature/SYS Temperature /SYS FAN1, SYS FAN2 /VLDT/VDIMM/VCORE/
NBVCC

This will show the CPU/FAN/System voltage chart and FAN Speed.

«
...
35
36
37
38
39
...
»

Содержание 780G























































Отзывы:

Нет отзывов