26
3-6-2 DRAM Configuration
Phoenix – AwardBIOS CMOS Setup Utility
DRAM Configuration
Item Help
DRAM Latency (tcl) Auto
(Trtc) RAS to CAS R/W Delay Auto
(Trp)Row precharge Time Auto
(Tras) Minimum RAS Active Time Auto
DRAM Command Rate 2T
CKE base Power dowe mode Disabled
CKE BASED Powerdown per channel
Memclock tri-slating Disabled
Momery Hole Remapping Enabled
Auto optimize Bottom IO Enabled
Bottom of [31:24] IO Space D8
Bottom of UMA DRAM [31:24] FC
DDRII Timing Item Disabled
TwTr Command Delay 3 bus clock
Trfc 0 for DIMM0 75ns
* Trfc 1 for DIMM 1 75ns
* Trfc 2 for DIMM 2 75ns
* Trfc 2 for DIMM 3 75ns
(Twr)Write Recovery Time 6 bus clocks
(Trtp)Precharge Time 3 clocks
（
Trc
）
Row Cycle Time 26 bus clocks
(Trrd)RAS to RAS Delay 5 clocks
Menu Level >>
↑↓→←
Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
DRAM Latency
The settings are: Auto, 3T, 4T, 5T.
RAS-to-CAS R/W Delay
The settings are: Auto, 3 clocks, 4 clocks, 5 clocks, 6 clocks.
Minimum RAS Active Time
The settings are: Auto, 5~18 bus clocks.
DRAM Command Rate
The settings are: Auto, 1T,2T.
CKE Based Power Down Mold
The optional settings are: Per Channel; Per CS.