64
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the
equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for
help.
4.
RF exposure warning This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter.
End-users and installers must be provided with antenna installation instructions and transmitter
operating conditions for satisfying RF exposure compliance.
IC Warning Statement
TThis device complies with Industry Canada’s licence
-exempt RSSs. Operation is subject to the
following two conditions: (1) This device may not cause interference; and (2) This device must
accept any interference, including interference that may cause undesired operation of the device. Le
présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts
de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas
produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. This equipment
complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a minimum distance of 20cm between the radiator
and any part of your body. Pour se conformer aux exigences de conformité CNR 102 RF exposition,
une distance de séparation d'au moins 20 cm doit être maintenue entre l'antenne de cet appareil
ettoutes les personnes.
Appendix A: Toxic or Hazardous Materials or Elements
Component Name
Toxic or Hazardous Materials or
Elements
Pb
Hg
Cd
Cr VI
PBB
PBDE
Sheet Metal(Case)
○
○
○
○
○
○
Plastic Parts (Panel
）
○
○
○
○
○
○
Circuit Board
○
○
○
○
○
○
Fastener
○
○
○
○
○
○
Wire and
Cable/Ac
Adapter
○
○
○
○
○
○
