AMC VersaTox, Инструкция по эксплуатации

Страница: 18 / 29

18
4.2.1.7 AC Transmitter with or without Relay to BAS (Optional)
The AMC-VersaTox can have a 4 wire connection to a BAS with the addition of the relay, power
board. This additional board also has an optional relay, for relay wiring see section 4.2.2. The
AMC-VersaTox with optional display and relay should be connected as shown in the following
figure, by four twisted wires in a shielded cable.
For wiring selection, see section 4.3.3.
NOTE: A separate transformer must be employed with each AMC-VersaTox.
TB1
D1 AC-IN 1
SIG
D2
ALRM
TB2
TP5
TP1
TP2 TP3
NC
SIG OUT
TP4
ALRM PWR
GND
AL
AR
M
NO
RE
LA
Y
V+
+5V
AC-IN 2
GND
ALARM ADJ.
RELAY, POWER BOARD
NOTE: THIS WIRING SCHEME IS THE
SAME WITH THE DISPLAY OPTION
NOTE: PLUGGABLE CONNECTOR
THE AMC VersaTox HOUSING IS NOT SHOWN FOR CLARITY
WARNING
CABLE SHIELD MUST
NOT BE USED AS A
CONDUCTOR.
POWER
{
TRANSFORMER
120 VAC
OR 240 VAC
L2
L1
BUILDING
+
-
4 - 20 mA
{
AUTOMATION
SYSTEM
FIGURE 4-10 AC Transmitter with or without Relay to BAS
4.2.1.8 AC Transmitter with or without Relay to Transformer only (Optional)
The AMC-VersaTox can have a 2 wire connection to a transformer with the addition of the relay,
power board. This additional board also has an optional relay, for relay wiring see section 4.2.2.
The AMC-VersaTox with optional display and relay should be connected as shown in the
following figure, by a twisted pair of wires in a shielded cable.
For wiring selection, see section 4.3.3.
NOTE: A separate transformer must be employed with each AMC-VersaTox.