5
www.amcelettronica.com
IT-2000
SMS TEXT COMMANDS
COMMAND
DESCRIPTION
EXAMPLE
PWD
Password declaration or assignment
The number of characters of the password
ranges from 0 to 6; if 0, the password is do-
sabled but an empty password declaration
command must be used to access the sy-
stem
pwd:000000
this command allows the user to
login the system
pwd=111111
this command sets a new password
TEL
Command to assign a value (max 32 cha-
racters) to one of the 8 telephone numbers
provided by the system. The command must
be followed by an index. The admitted cha-
racters are numbers and ‘+’
tel.1=+39339258741
SMSTEXT
Command to assign a text value (max 40
characters) to one of the 4 SMSs supported
by the system (the 5th and the 6th cannot be
configured).
The command must be followed by an index.
smstext.1=periodic_life_test
This command will substitute the default value of
the life test SMS with the “periodic_life_test” text.
Warning:
if the text contains space characters, it
must be included in a “ pair
SMSTEL
Command to link a SMS message to one or
more telephone numbers.
The command must be followed by an index
list.
smstel.1=12 smstel.3=4 smstel.4=0
SMS 1 will be sent to telephone numbers 1 and 2;
and SMS 3 will be sent to telephone number 4
and SMS 4 will not be sent to any number
LFOUT
Command to define the lifetest output signal
duration in second units
lfout=5
The lifetest output will be active for 5 seconds
LFTIME
Command to define the time duration of the
lifetest time in minute units: during lifetest
SMS dispatch, for the specified time, the sy-
stem will switch to the GSM network even if
the PSTN line is available.
lftime=10
Sets the lifetest time to 10 minutes.
LFDELAY
Command to set the lifetest interval in hour
units .
lfdelay=24
Lifetest (signal activation and SMS dispatch) will
be executed every 24 hours.
LFSTART
Command to set the delay, in hour units,
between the current SMS reception time and
the first execution of lifetest operations.
lfstart=8
The firtst lifetest procedure will start after 8 hours.
For example, with this command is possible, at
17:00, to program procedure to be executed at
01:00 time. Starting at 01:00 the lifetest will be
executed every LFDELAY value hours
GSMOFF
This command sets the GSM signal absence
time threshold (in minute units) to trigger the
GSM FAIL SMS forward operation.
gsmoff=5
If the GSM network is not available for more than
5 minutes, the system wiill send, as soon as pos-
sible, the GSM FAIL message.
GSM
(ON|OFF)
This command forces or not the usage of the
GSM network.
gsm=on
the system will work only on the GSM
network line ignoring the PSTN line
gsm=off
the system will use the PSTN line if
available, otherwise it will use the GSM
network
PFX
Command to add a prefix (max 6 characters)
to the telephone number of an GSM network
outgoing call .
pfx=+39
The 39 will be added to the telephone num-
ber generated by the alarm unit.
For example, if the units generates 335349872
number, when forwarded to the GSM network the
+39335349872 number will be composed
SKIP
(ON|OFF)
This command enables or disables the tele-
phone extension option.
skip=on
the first digit of the number generated
by the alarm unit will be skipped when
operating on the GSW network
skip=off
no digit will be skipped
PULSE
(ON/OFF)
This command configures the output dial
tone (ON=pulsed OFF=continuous)
pulse=off
the unit generates a continuous dial
tone
