background image

www.amcelettronica.com

IT-2000

IT-2000

TELEPHONE GSM INTERFACE 

TECHNICAL MANUAL 

(ENGLISH)

 

DESCRIPTION

The IT-2000 GSM interface simulates a traditional telephone line (PSTN) using a GSM system module.

It  can be used as telephone backup system when a PSTN line is out of order or is not available: in these 

conditions, or if the interface is properly configured, a call from an external unit is forwarded  through the 

GSM network. Besides, in the previous conditions, an incoming call from GSM network, generates a ring for 

the external unit. 

The system is completely transparent to SIA FSK and CONTACT ID protocols signals; it also provides sy-

stem status and lifetest O.C. outputs .

Using SMS commands IT-2000 can be remotely configured and can generate system informations.

AUTOMATIC SMS MESSAGES

IT-2000 handles incoming and outgoing SMS messages.

Incoming messages are used to configure the system.

Outgoing messages can be answers to commands or the following event-generated (if enabled) messa-

ges:

ID

Default Text

1

Description

1

 LIFE TEST

Programmable life test: 

sent periodically according to the configu-

ration

2

LOW BATTERY

Battery fail 

(the battery status is tested every 15 minutes)

3

GSM NO LINE

GSM fail: 

this message is sent as soon as the GSM network becomes 

available after a programmable out of service time

4

PSTN FAILURE

PSTN line FAIL: i

f the PSTN line is not available this message must 

be disabled 

“Sender 

ID”:received 

text

2

SMS echo function: 

this function forwards each incoming not reco-

gnized SMS (e.g.: SIM card expiry, credit exhaustion, etc.)

6

GSM:OK LEV :3

PSTN:FAIL

BATT:OK

After detecting a ring from the GSM network, the system checks if the 

calling telephone number belongs to the adrress book and, if yes, it 

answers with a message containing the system status.

This message doesn’t need  to be associated to a specific telephone 

number of the address book.

1) The text of the first 4 messages can be changed

2) The echo function returns the message received by the system preceeded by the sender id.

    This function also allows to monitor improper access attempts

A SMS message is sent if the relevant event occurs and if it has been previously associated at least to a 

telephone number (8 telephone numbers may be stored in the system): by default, all messages are asso-

ciated to the first telephone number of the address book.

COMPLIANT

 EN 50136-1-1 EN 50136-2-1+A1

ATS 2

Содержание IT-2000









Отзывы: