www.amcelettronica.com
installation instructions v2.0
ISIDE 130
ISIDE is a 105 dB power auto supplied sounder could be configured as positive missing/giving or negative missing/
giving. It features a low consuption led flasher and a STAND BY LED. The STAND BY indicator is flashing constant at
1 sec. the LED flasher to indicate that the system is powered and running.
ENGLISH
Nominal Supply Voltage:
13,8 Vcc
Functioning Voltage Limits:
11 ¸ 15 Vcc
Maximum Current Consumption:
150mA
Stand-by Current Consumption:
8 mA
Sound Pressure (Vn=13,8V ):
Type = TONE 105 dB(A) at 1 m
Sound and Light Timing without control:
5’ ± 20%
Back-up Battery:
12 V , 2,2 Ah
Dimensions:
330mm(L) x 220mm(H) x 60mm(P)
Weight:
700g
Working Temperature:
- 40 °C ¸ + 60 °C
TECHNICAL SPECIFICATIONS
TAMPER:
N.C. Antiopening and Tearing Off Contact
- :
13,8 V Supply ( Nominal )
S :
Trig Terminal
Battery:
Battery
charge terminal (12V 2.2Ah)
DIP 1
ON = STAND BY MODE ENABLE
DIP 2
DIP 3
OFF
OFF
Missing positive
ON
OFF
Giving positive
OFF
ON
giving negative
ON
ON
Missing negative
The system also provides tha alarm signal, when it is absent one of the power cable.
L’installazione deve essere eseguita a regola d’arte da personale specializzato.
Il produttore declina ogni responsabilità nel caso in cui il prodotto venga manomesso da persone non autorizzate.
Si raccomanda di verificare il corretto funzionamento del sistema d’allarme almeno una volta al mese, tuttavia un sistema
di allarme elettronico affidabile non evita intrusioni, rapine, incendi o altro, ma si limita a diminuire il rischio che tali situa-
zioni si verifichino.
Installation must be carried out following the local installation norms by qualified personnel.
The manufacturer refuses any responsibility when changes or unauthorized repairs are made to the product/system.
It is recommended to test the operation of the alarm product/system at least once a month. Despite frequent testing and
due to, but not limited to, any or all of the following: tampering, electrical or communication disruption or improper use, it
is possible for the product/system to fail to prevent burglary, rubbery, fire or otherwise. A properly installed and maintained
alarm system can only reduce the risk that this happens.
