SPECIFICATIONS
Alimentazione / Input Voltage
Consumo / Current Drain (Alarm/Stand-By)
(12 mA / 23mA) @ 13.8 Vdc
Current drain with Lamp /consumo con lampada
260mA @13.8 Vdc
Grado di Protezione IP / IP Grade
IP42
Portata in lunghezza / Coverage
2 - .35 m
Portata in larghezza / Angle
165
°
Piroelettrico / PIR
2 elementi / 2 elements
Lente (fasci e livelli) / Lens (beams and levels)
6 patterns on 1 levels
Durata allarme / Alarm period
Antiapertura / Anti-opening
4 sec.
s
Contatto di allarme / Alarm
’s Contact
100 mA - 40 V - 16
Ω
Contatto di tamper / Tamper Switch
Max 40 mA - 30 Vdc
Temperatura di esercizio / Operating Temperature
From -25
°C to +55 °C
RFI Protezione / Protection
10 V / m (20 /1000 MHz)
Led WALK TEST (MW and PIR)
S
Cover / Housing
ABS
Dimensioni / Dimensions
L145 x H37 x P30 mm
Installation must be carried out following the local installation norms by qualified personnel.
The manufacturer refuses any responsibility when changes or unauthorized repairs are made to the product/system.
It is recommended to test the operation of the alarm product/system at least once a month. Despite frequent testing and
due to, but not limited to, any or all of the following: tampering, electrical or communication disruption or improper use, it
is possible for the product/system to fail to prevent burglary, rubbery, fire or otherwise. A properly installed and maintained
alarm system can only reduce the risk that this happens.
9 to 15 Vdc
