29
AMC VIBRATION SENSOR / ©AMC VIBRO Sp. z o.o.
Figure 24. Data file
Important notice- data format is made in a way to provide marking of warnings and alarms as well as
self-diagnostic status. The method of marking is as follows:
»
Warnings and Alarms – the value in the the warning and alarm field has a 16-bit binary format.
Value of 1 indicates the presence of a warning or alarm and value of 0 means that they are not
present. The LSB (in a file the first bit visible on the far right side) means the alarm of the first
estimate, that is acceleration 0-Peak from channel X. The second bit from the left means that
the source of occurrence is acceleration RMS from channel Y and so on
»
Sensor Status – bit coding is as follows, counting out from LSB (that is from the right side).
The value of 1 means the presence of the mentioned state:
1.
Active mode
2.
Temperature measurement failed
3.
RTC chip error
4.
Flash memory error
5.
RAM memory error
6.
Analog process failed
7.
Not used
8.
Reconfiguration not received yet
9.
Reconfiguration error
»
RF Status – bit coding is as follows, counting out from LSB (that is from the right side). The value
of 1 means the presence of the mentioned state:
1.
RF module error
Содержание AVM GATEWAY
Страница 13: ...13 AMC VIBRATION SENSOR AMC VIBRO Sp z o o Figure 6 AVS 2000R dimensions in millimeters ...
Страница 18: ...18 AMC VIBRATION SENSOR AMC VIBRO Sp z o o Figure 9 Sensor configuration part 1 ...
Страница 27: ...27 AMC VIBRATION SENSOR AMC VIBRO Sp z o o Figure 21 Data plot Figure 22 Data tab Current Values ...
Страница 34: ...34 AMC VIBRATION SENSOR AMC VIBRO Sp z o o Figure 27 The OPC structure for the Vibration sensor ...
