amc VIBRO AVM GATEWAY, Руководство пользователя

Страница: 25 / 41

25 AMC VIBRATION SENSOR / ©AMC VIBRO Sp. z o.o.
Table 8. Status of the AVS 2000R
Parameter Information
Date of the status This is the date when the sensor device collected the
measurements and judged its status, which is now visible
on the site
Battery Life The battery level which is expressed as percentage
Temperature Temperature in Celsius degrees
Voltage supply Battery voltage given in millivolts
Estimates to send The number of statuses – packets of estimates that are
waiting for sending to the GATEWAY
Free memory Free place in the flash memory for the statuses - packets
of estimates. It is equal:
8095 - Estimates to send
New configuration status If the newly sent configuration from AVM GATEWAY is not
yet saved by AVS 2000R, the following message appears:
The new configuration is not yet present on the sensor
Status of configuration transmission If there is an error when sending the configuration, a
message is displayed: An error occurred on configuration
transmission
Battery alert If the battery has run out, an message Low battery detected
will appear and then the System administrator is obliged
to report this event to AMC VIBRO to exchange the battery.
Values of estimates The measured estimates are:
» 0-Peak & RMS vibration acceleration [m/s2]
» acceleration kurtosis [-]
» 0-Peak & RMS vibration velocity [mm/s]
» ISO RMS velocity [mm/s]
» acceleration envelope RMS and Peak-Peak [m/s2]
» acceleration or velocity in 8 defined bands (BEC)