2. Front panel description
»
Measurement chain diagnostics for IEPE
sensor:
Red LEDs
(inactive for DT version):
open - open circuit or sensor failure
short - short circuit or sensor failure
»
Indicator of the selected
estimate:
Green LEDs:
RMS – RMS value of vibration signal
PEAK – maximum value of vibration signal (0-Peak)
»
Indicator of the selected measured
value:
Green LEDs:
acc – acceleration
vel – velocity
»
Alarm outputs indicators:
Red LED:
ALARM – the alarm threshold exceeded, alarm output
ON
Yellow LED:
WARNING – the warning threshold exceeded, warning
ON
»
Proper work indicator:
Green OK LED:
diode pulsing with frequency of 1 Hz indicates the
correct operation of the device
rapid pulsing of diode means entering the device setup
menu
»
Keyboard:
UP – up
DN - down
SET - set
»
Measured value:
double-digit LED display
4
AV MONITOR 1002DX
