Version
1.0
©Copyright
2015,
Ambient
LLC.
All
Rights
Reserved.
Page
5
Term Definition
value of the quantity being measured.
Range
Range is defined as the amount or extent a value can be measured.
5.
Specifications
5.1
Wireless
Specifications
•
Line of sight wireless transmission (in open air): 120 feet
•
Frequency: 433 MHz
•
Update Rate: 60 seconds
5.2
Measurement
Specifications
The following table provides specifications for the measured parameters.
Measurement Range
Accuracy
Resolution
Indoor Temperature
32 to 140 °F
± 2 °F
0.1 °F
Outdoor Temperature
-40 to 149 °F
± 2 °F
0.1 °F
5.3
Power
Consumption
•
Base station : 2 x AAA 1.5V Alkaline batteries
•
Remote sensor : 2 x AAA 1.5V Alkaline or Lithium batteries
•
Battery life: Minimum 24 months for base station
Minimum 24 months for remote thermometer sensor
6.
Troubleshooting
Guide
If your question is not answered here, you can contact us as follows:
1.
Email Support:
2.
Live Chat Support:
www.ambientweather.com/chat.html
(M-F 8am to 4pm Arizona Time)
3.
Technical Support: 480-283-1644 (M-F 8am to 4pm Arizona Time)
Problem Solution
Wireless remote thermometer not
reporting in to console.
There are dashes on the display console.
The maximum line of sight communication range is
120’. Move the sensor assembly closer to the display
console.
If the sensor assembly is too close (less than 10’), move
the sensor assembly away from the display console.
Cycle power on the console. The console may have
exited the search mode.
Install a fresh set of batteries in the remote thermometer.
For cold weather environments, install lithium batteries.
Make sure the remote sensors are not transmitting
433.92 MHz