21
Error! Reference source not found.
summarizes the set mode sequence and commands.
Command
Mode
Settings
Image
[MODE] +
2 seconds
Enter Set Mode,
Beep On or Off
Press [TEMP +] or [WIND -] to switch OFF and ON.
This will prevent the beep from sounding when pressing any
button.
[MODE]
Clear Max/Min
Press [TEMP +] or [WIND -] to switch OFF and ON.
When set to ON, the minimum and maximum values reset
every day at midnight (00:00).
When set to OFF, the minimum and maximum values must be
reset manually.
[MODE]
12 hour / 24
Hour Format
Press [TEMP +] or [WIND -] to switch hour format between
12 hour and 24-hour format.
[MODE]
Hour
Press [TEMP +] or [WIND -] to adjust hour up or down.
[MODE]
Minute
Press [TEMP +] or [WIND -] to adjust minute up or down.
[MODE]
Year
Press [TEMP +] or [WIND -] to adjust year up or down
[MODE]
Month
Press [TEMP +] or [WIND -] to adjust month up or down
[MODE]
Day
Press [TEMP +] or [WIND -] to adjust day up or down
[MODE]
Pressure Units of
Measure
Press [TEMP +] or [WIND -] to change units of measure
between hap, mmHg or inHg.
[MODE]
Relative Pressure
Calibration
Press [TEMP +] or [WIND -] to adjust relative pressure up or
down
Reference Section 9.1.3 for details on calibration of relative
pressure.
[MODE]
Temperature
Units of Measure
Press [TEMP +] or [WIND -] to change temperature units of
measure between °F and °C.
[MODE]
Wind Units of
Measure
Press [TEMP +] or [WIND -] to change wind units of measure
between mph, km/h, knots, m/s and bft.
[MODE]
Rain Units of
Measure
Press [TEMP +] or [WIND -] to change rain units of measure
between in and mm.
[MODE]
Exit Set Mode
[MODE] + 2 seconds means press and hold the MODE button for two seconds.
[MODE] means press the MODE button.
Figure 21
