50D0077 Rev 1
Page 5 of 10
Ambient Technologies
A Division Of MHS
OPERATIONS:
Wireless Wall Transmitter:
General:
The
RCT
Remote
Control
has four
(4 )
operatin
g
modes:
Manual,
Timer,
Auto,
and
Auto-P.
The
control
system
can be
set to
tempera
ture
ranges
between
45°F
and
90°F.
The transmitter will operate the remote receiver from 1foot to a maximum of 30 feet. The distance is reduced when
batteries are low or when the receiver is inside a metal enclosure.
Initial start up:
1.
After initial power up or when RESET button is pressed, the
transmitter is reset. The reset button is located behind the flip door.
2.
During system reset, all features of the LCD will be visible. After one
second, the LCD will be initialized. A typical reset display is shown
above. Note that the temperature scale is degree F.
3.
While °F is flashing, press SET and TIME/CANCEL more than 3
seconds to select between °C and °F display. It will exit setting mode
automatically after 10 seconds if no key is pressed.
4.
After reset the transmitter is operating in manual mode. The time and
room temperature are shown as above.
WA
RNI
NG
Do not use two (2) or more remote control systems in the same area with the same dip switch
settings, as they will communicate with each other. This may cause the appliances to
malfunction.
