50D0077 Rev 1
Page 8 of 10
Ambient Technologies
A Division Of MHS
2.
The transmitter will not work mode until child-proof mode is deactivated by pressing the ON and OFF
buttons simultaneously for 3 seconds again to exit child-proof mode.
Transmitter Thermal Shutdown:
1.
If transmitter measures a room temperature exceeding 99 degrees
Fahrenheit, the LCD will display “HI” and the transmitter will turn off
the appliance.
2.
Transmitter will not function until the room temperature has dropped
below 99 degree Fahrenheit.
Receiver:
Slide Switch:
1.
ON position: the system will remain on until the slide switch is placed in the OFF or RS (remote) position.
2.
RS (remote) position: the system will only operate if the remote receiver receives a signal from the
transmitter.
3.
OFF position, the system is off. The slide switch should be placed in the OFF position if you will be away
for an extended period of time. If the remote receiver is mounted out of children’s reach, the OFF position
also functions as a safety device by both turning the system off and rendering the receiver inoperable.
TESTING YOUR NEW REMOTE CONTROL SYSTEM
1.
Connect the wiring terminal to the appliance. Refer to the appropriate Homeowner’s Manual for proper
wiring connections to the appliance.
2.
Light your gas appliance following the appliance lighting instructions that came with the appliance.
Confirm that the pilot light is on; it must be in operation for the remote control to operate the main gas
valve. Appliance control knob must be in the ON position. Appliance ON/OFF switch must be in OFF
position.
3.
Slide the 3 position button on the remote receiver to the ON position. The main gas flame should ignite
4.
Slide the button to OFF. The flame should extinguish (the pilot light will remain on).
5.
Slide the button to RS (remote), then press the ON button on the transmitter to turn the system to ON. The
main gas flame should ignite.
6.
Press the OFF button on the transmitter to turn the system to OFF. The flame should extinguish (the pilot
light will remain on).
TROUBLESHOOTING
