50D0089 Rev 2
Page 6 of 10
Ambient Technologies
A Division Of MHS
Wireless Wall Transmitter:
General:
The WMTD Remote Control has two (2 ) operating modes: Manual and Timer.
The transmitter will operate the remote receiver from 1 foot to a maximum of 30 feet. The distance is reduced when
batteries are low or when the receiver is inside a metal enclosure.
Initial start up:
1.
After initial power up or RESET button is pressed, the transmitter is
reset. The reset button is located in front of the unit.
2.
During system reset, all segments of the LCD will be turned on.
After one second, the LCD will be initialized and operational.
Typical reset displays are shown. Note that the temperature scale is
degree F.
3.
When reset the transmitter is operating in the manual mode. The
time and room temperature are shown.
Reset Button:
1.
The reset button can be used to reset the systems such as the clock setting. The reset button is located in
front of the unit.
2.
Using a paper clip, press the button and the system will reset and go into clock setting mode.
