Ambient Technologies WMTD Скачать руководство пользователя страница 7

50D0089 Rev 2

Page 7 of 10

 Ambient Technologies

A Division Of MHS

Setting Clock:

1.

 

In clock setting mode, only clock and degree is displayed. Press  _  to advance item (hour, minute or

temperature units (F or C)). Selected item is flashing.  Press  _  to select.  After setting the time, press  _  to
enter manual mode.

Manual Mode:

1.

 

Transmitter comes preset for manual
on/off operation.

2.

 

Press the _  button once to turn on the

appliance. Press the  _  button to turn it off.

Timer mode:

1.

 

To select timer mode, remove the housing to access the slide switch.

2.

 

Select timer mode by set the slide switch to position T1 or T2.

3.

 

For T1, default value is 30 min. press _  key to increase the

setting to 60 or 90 min, or press  _  key to decrease the setting as
desire.

4.

 

For T2, default value is 60 min. press _  key to increase the

setting to 120 or 180 min, or press  _  key to decrease the setting
as desire.

5.

 

ON signal will transmit after 5 seconds of if key is pressed or 5
seconds after last key was released.

6.

 

OFF signal will transmit when time is up or when setting of slide
switch is changed from timer to manual mode.

Low-battery detection:

1.

 

Battery voltage is checked once a minute. When the
battery voltage drops to a certain level, the low-battery
warning will come on, and the transmitter 

will turn

off the appliance

.  The transmitter’s keypad will not

function until fresh batteries are installed.

2.

 

When the batteries are low, the LCD shows a low
battery indicator. The low battery warning will be
displayed in any mode.

3.

 

The transmitter will not operate with low batteries.
Change the battery before the battery is too weak for
normal operation.  

TURN THE UNIT OFF

BEFORE REPLACING BATTERIES.

Child-proof protection:

1.

 

Press and hold  _  and  _  buttons simultaneously for 3
seconds to enter child-proof mode.

2.

 

The transmitter will not work mode until child-proof
mode is deactivated by pressing the  _  and  _  buttons
simultaneously for 3 seconds again to exit child-proof
mode.

Child Proof

Indicator

 

M

T1

T2

Slide Switch

MANUAL ON/OFF 

TIMER 30/60/90 

TIMER 60/120/180 

Low Battery

Indicator

Содержание WMTD











Отзывы: