Helpful hints
10
Helpful hints
1.
The food chopper will not start if the bowl and the cover are not properly aligned
and locked into the base unit.
2.
Press LOW button for low-speed function, HIGH for high-speed function. Press
OFF button to stop the unit.
3.
Press and release quickly the PULSE button to chop.
4.
Press LOW or HIGH button to process continuously
5.
A scraper may be used, but it must only be used when the food chopper is not
running.
6.
Do not use the food chopper without the blade securely in place.
NOTE: The
blade is very sharp. Handle carefully.
7.
The food chopper can be used for mincing boneless meat, nuts, onions, and garlic.
8.
Do NOT use the food chopper to crush ice, coffee beans, or similar hard
substances as this can damage the blade.
9.
Always cut large pieces of food into smaller pieces of even size-about ½ inch. This
will help to make sure you get an even chop.
10.
Do not overload the bowl, overloading can cause inconsistent results and it
strains the motor.
11.
The OFF/PULSE button is used to turn off the food chopper after the unit has
been on or to turn it on for very short bursts of time. It will shut off as soon as you
let up on the button.
12.
Unlock the cover before removing the bowl by twisting it counter clockwise.
13.
Remove the bowl before removing the blade assembly to prevent food from
leaking through the center opening of the bowl.
14.
Unplug the food chopper when not in use.
15.
NEVER run longer than 30 seconds, wait 1 minute to start again
16.
Place your hand on the lid and hold in place for extra stability.
SAVE THESE INSTRUCTIONS!
