ambiance Inspiration 29, Инструкция по установке, эксплуатации и обслуживанию

Страница: 45 / 68

45
Operation
Temperature Indication Display
With the system in the “OFF” position, press the Thermostat Key and the Mode Key at the same time to switch between Fahrenheit (F)
or Celsius (C). Verify on the LCD screen the correct designation is visible.
Variable Flame Control
The Proflame IFC has six (6) flame levels. With the system “ON” and the flame at maximum in the appliance, pressing the Down Arrow
Key once will reduce the flame height by one step. Repeat to lower the flame till “OFF”. With flame OFF in this configuration, fan and
lights will still be operational.
The UP Arrow Key will increase the flame height each time it is pressed.
If the UP Arrow Key is pressed while the system is on but the flame is off, the flame will activate in the high setting.
A single “beep” will confirm reception of the command.
This function is disabled when in SMART Thermostat Mode and does not operate in the first two minutes of
operation during the Dynamic Start Advantage.
Fan Speed Control
If the appliance is equipped with a hot air circulating fan, the speed of the fan can be controlled by the Proflame system. The fan speed
can be adjusted through six (6) speeds. To activate this function use the Mode Key to index to the fan control icon. Use the Up/Down
Arrow Keys to turn on, off or adjust the fan speed. A single “beep” will confirm reception of the command.
In manual mode the fan will activate immediately upon
burner ignition. Adjust the fan speed to personal preference.
Blower will shut off when the burner is extinguished.
Figure 19.5.06:
Figure 19.5.07:
Figure 19.5.08: