17
NOTICE
WHEN THE HEATER IS FIRST TURNED ON, A SLIGHT ODOR MAY BE PRESENT. THIS
IS NORMAL AND SHOULD NOT OCCUR AGAIN UNLESS THE HEATER IS NOT USED
FOR A LONG PERIOD OF TIME.
NOTICE
TO IMPROVE OPERATION, AIM THE REMOTE CONTROL AT THE FRONT OF THE
FIREPLACE. DO NOT PRESS THE BUTTONS TOO QUICKLY. GIVE THE UNIT TIME TO
RESPOND TO EACH COMMAND.
Temperature Limiting Control
This heater is equipped with a temperature limiting control. Should the heater reach an
unsafe temperature, the heater will automatically turn OFF. To reset:
1.
Unplug the power cord from the outlet.
2.
Turn the ON/OFF switch on the CONTROL PANEL to OFF. Wait 5 minutes.
3.
Inspect the fireplace to make sure no vents are blocked or clogged with dust or lint. If they
are, use a vacuum to clean the vent areas.
4.
With the POWER switch in the OFF position, plug the power cord back into the outlet.
5.
If the problem continues, have your outlet and wiring inspected by a professional.
Remote Control Battery Information
ͳ
This remote control uses one CR2025 battery (included).
NEVER DISPOSE OF BATTERIES IN FIRE. FAILURE TO OBSERVE THIS
PRECAUTION MAY RESULT IN AN EXPLOSION. DISPOSE OF BATTERIES AT
YOUR LOCAL HAZARDOUS MATERIAL PROCESSING CENTER.
1
630611_
