Amazone ZG-B 5500 Drive, Руководство по эксплуатации

Страница: 59 / 176

Structure and function
5.11 PTO shaft
The PTO shaft transmits power between the
tractor and machine.
One-sided PTO shaft with wide angle (Fig. 29/1)
•
Wide angle attached on the tractor side,
standard
•
Wide angle attached on implement side if
Trail-Tron is used.
Fig . 29
WARNING
Danger of crushing from tractor and machine unintentionally
starting up or rolling away!
Couple or decouple the PTO shaft and tractor only when tractor and
machine have been secured against both unintentional starting and
unintentional rolling away.
WARNING
Danger of catching or entrapment due to the unprotected gear-
box input shaft owing to the use of a PTO shaft with a short PTO
shaft guard!
Use only one of the listed permissible PTO shafts.
WARNING
Danger of trapping and entrapment by unguarded PTO shaft or
damaged safety devices!
•
Never use the PTO shaft if the safety device is missing or dam-
aged, or without correctly using the supporting chain.
•
Before all use, check that
ο
all PTO shaft protective devices are installed and fully func-
tional.
ο
the clearance around the PTO shaft is sufficient in all oper-
ating modes. Insufficient clearance will result in damage to
the PTO shaft.
•
Attach the supporting chains in a way that ensures sufficient
swivelling range of the PTO shaft in all operating positions. Sup-
porting chains must not become caught on machine or tractor
parts.
•
Have any damaged or missing parts of the PTO shaft replaced
immediately with OEM parts from the PTO shaft manufacturer.
Note that only a specialist workshop may repair a PTO shaft.
•
After decoupling the PTO shaft, place it on the holder provided.
This protects the PTO shaft from damage and dirt.
ο
Never use the supporting chain of the PTO shaft to sus-
pend the uncoupled PTO shaft.
ZG-B
BAG0003.18 01.19
59