Amazone ZG-B 5500 Drive, Руководство по эксплуатации

Страница: 113 / 176

Coupling and uncoupling the machine
7.2 Uncoupling the machine
DANGER
●
Before uncoupling, always secure the machine with 2 wheel
chocks.
●
Before uncoupling the
ZG-B
, make sure that uneven resi-
due in the hopper is distributed evenly to prevent the com-
bination from tipping.
●
Risk of accident from the drawbar moving upwards.
●
If the load is concentrated on one side at the rear, the bulk
fertiliser spreader must not be uncoupled. As a single-axle
vehicle, a load concentrated on one side at the rear leads to
a risk of the bulk fertiliser spreader tipping over backwards.
WARNING
Risk of contusions, cutting, catching, drawing in and knocks
through insufficient stability and possible tilting of the uncou-
pled machine!
Park the empty machine on a horizontal space with a hard surface.
When uncoupling the machine, there must always be enough space
in front of the machine, so that you can align the tractor with the ma-
chine if necessary.
1. Park the machine in a level parking area on solid ground.
2. Uncouple the machine from the tractor.
2.1 Secure the machine against unintentionally rolling. See
page 105.
2.2 Lower the stand to the parking position.
2.3 Un couple the connection fitting.
2.4 Draw the tractor approximately 25 cm forwards.
The space created between the tractor and the machine al-
lows better access for decoupling the PTO shaft and the
supply lines.
2.5 Secure the tractor and machine against unintentional start-
ing and unintentional rolling.
2.6 Uncouple the supply lines.
2.7 Fasten the supply lines in the corresponding parking sock-
ets.
2.8 Hydraulic brake: detach parking brake pulling cable from
tractor.
ZG-B
BAG0003.18 01.19
113