Check for safe condition
Protective equipment that is not functional, faulty
or removed can result in dangerous situations.
Check the machine at least once a day for
visible damage and check the function of the
protective equipment.
If you have any doubts as to whether the
protective equipment is in proper condition,
ask a qualified specialist workshop.
Before working on the machine,
make sure that the protective equipment is
properly installed and functional.
Replace damaged protective equipment.
Climbing on and off
Negligent behaviour while climbing on and off can
cause people to fall off the ladder. People who
climb onto the machine without using the
intended access steps can slip, fall, and suffer
severe injury.
Use only the intended access steps
Dirt as well operating materials can impede
walking safety and stability.
Always keep steps and platforms clean and in
proper condition, so that safe stepping and
standing is ensured.
Never climb onto the machine when it is in
motion.
Climb up and down facing the machine.
When climbing up and down, maintain 3-point
contact with the access steps and handrails:
always keep two hands and one foot or two
feet and one hand on the machine.
When climbing up and down, never hold onto
the control elements. Accidental actuation of
control elements can unintentionally activate
potentially dangerous functions.
When climbing down, never jump off of the
machine.
2 | Safety and responsibility
Safety routines
MG6399-EN-II | D.1 | 11.03.2020
21
Содержание Profihopper 1500 SmartLine
Страница 153: ......