2.3
Safety routines
Only work on the machine when it is at a
standstill
If the machine is not standing still, part can move
unintentionally or the machine can be set in
motion. This can result in serious injury or death.
Before performing any work on the machine,
shutdown and secure the machine.
Securing the machine
If the machine is not secured against
unintentional starting and rolling away, the
machine can be set in motion in an uncontrolled
manner, and can run over, crush and kill people.
Lower any raised machine parts. Relieve
pressure in the hydraulic lines by actuating
the operating devices. If it is necessary to go
under the machine or components: Before
starting to work, secure the raised machine or
components mechanically against lowering.
Otherwise, the machine or components can
slowly descend unnoticed and crush people.
Switch off the engine.
Actuate the parking brake of the machine.
Remove the ignition key.
Secure the machine against unintentionally
rolling away on level ground
by applying the parking brake.
On uneven ground or on slopes
using wheel chocks and the parking brake.
CMS-T-00002673-A.1
2 | Safety and responsibility
Safety routines
MG6399-EN-II | D.1 | 11.03.2020
20
Содержание Profihopper 1500 SmartLine
Страница 153: ......