Amazone Profihopper 1500 SmartLine Скачать руководство пользователя страница 14

Страница: 14 / 154

Employees of the farmer, e.g. tractor driver

Family members of the farmer

Activity examples:

Driving the machine

Adjusting the mowing height

2.2.1.2 Workplaces and passengers

Passengers

Passengers can fall, be run over and severely
injured or killed due to machine movements.
Ejected objects can hit and injure passengers.

Do not let anybody ride on the machine.

Do not let anybody climb onto the driving
machine.

2.2.1.3 Danger for children

Danger for children

Children cannot assess dangerous situations and
can behave unpredictably. As a result, children
are at a higher risk.

Keep children away.

When you drive out or actuate machine
movements,

make sure that there are no children in the
danger area.

CMS-T-00002530-B.1

CMS-T-00002531-A.1

2 | Safety and responsibility

Basic safety instructions

MG6399-EN-II | D.1 | 11.03.2020

Содержание Profihopper 1500 SmartLine



























































































































































Результаты поиска

Содержание Profihopper 1500 SmartLine

Отзывы:

Похожие инструкции для Profihopper 1500 SmartLine

Бренды по названию

Популярные бренды

Amazone Profihopper 1500 SmartLine, Руководство по эксплуатации

Результаты поиска

Содержание Profihopper 1500 SmartLine

Отзывы:

Похожие инструкции для Profihopper 1500 SmartLine

Бренды по названию

Популярные бренды