manualshive.com logo in svg

Amazone Precea 6000-2, Оригинальное руководство по эксплуатации

Поделиться
Скачать
Amazone Precea 6000-2 Скачать руководство пользователя страница 17

2.1.3.2 Danger areas

Dangers areas on the implement

The following basic dangers are encountered in
the danger areas:

The implement and its work tools move during
operation.

Hydraulically raised implement parts can descend
unnoticed and slowly.

The tractor and implement can roll away
unintentionally.

Materials or foreign objects can be ejected out of
or away from the implement.

If the danger area is not observed, it can result in
serious personal injury or death.

Keep people out of the danger area of the
implement.

If people enter the danger area,

immediately switch off the engines and
drives.

Before you work in the danger area of the
implement,

secure the tractor and implement. This also
applies for quick checking work.

CMS-I-00005448

CMS-T-00007643-A.1

2 | Safety and responsibility

Basic safety instructions 

MG6967-EN-II | C.1 | 27.09.2021

11

Содержание Precea 6000-2































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды