Amazone KG 6002-2, Оригинальное руководство по эксплуатации

Страница: 108 / 118

9.3.4 The wheel mark eradicator collision protection is triggered.
The wheel mark eradicator has encountered a solid obstacle. The shear bolt is torn and
the wheel mark eradicator folded to the rear.
1. Remove the spare bolts
1
from the track marker
bracket.
2. Remove the damaged bolt
3
.
3. Fold the wheel mark eradicator
2
into working
position.
NOTE
Only use original bolts as a replacement.
4. Install the spare bolt.
5. Install the nut and tighten it.
CMS-I-00004507
9.4 Cleaning the machine
IMPORTANT
Risk of machine damage due to cleaning
jet of the high-pressure nozzle
Never direct the cleaning jet of the
high-pressure cleaner or hot water
high-pressure cleaner onto the marked
components.
Never aim the cleaning jet of high-
pressure cleaners or hot water high-
pressure cleaners on electrical or
electronic components.
Never aim the cleaning jet of the high
pressure cleaner directly on lubrication
points, bearings, rating plates, warning
signs, and stickers.
Always maintain a minimum distance
of 300 mm between the high-pressure
nozzle and the machine.
Do not exceed a water pressure of 120
bar.
Clean the machine with a high-pressure cleaner
or a hot water high-pressure cleaner.
CMS-T-00006305-A.1
CMS-T-00000593-C.1
9 | Repairing the machine
Cleaning the machine
MG6750-EN-II | C.1 | 21.07.2021 102