Settings
KG / KX / KE BAH0063-6 04.16
133
8.8
Adjusting the lift height limiter
CAUTION
Danger from failure of the universal joint shaft in case of
excessive bending of the driven universal joint shaft!
Observe the permitted bending of the driven universal joint shaft
when lifting the implement. Excessive bending of the driven universal
joint shaft causes increased, premature wear to or immediate
destruction of the universal joint shaft.
Switch off the PTO shaft of the tractor immediately if the lifted
implement makes a lot of noise while running.
The lift height limiter can be adjusted:
1. Unscrew the nuts (Fig. 140/1).
2. Put the actuation hooks into the desired
position (Fig. 140/2), so that it is possible to
lift with the universal joint shaft running.
3. Tighten the nuts (Fig. 140/1).
Fig. 140
8.9
Deactivating the lift height limiter
The lift height limiter can be deactivated:
1. Actuate the white pull rope and pull the
eyelet through the hole (Fig. 141/1).
2. Lock the eyelet with the spring cotter pin
(Fig. 141/2).
3. The actuation hook is fixed in the front
position and is not caught by the actuation
bolt (Fig. 141/3).
Fig. 141
