Initial operation
100
KG / KX / KE BAH0063-6 04.16
6.3
Attaching the side panels
1. Undo the flat head screws (Fig. 78/1).
2. Turn the side panel by 90°.
3. Insert the flat head screws (Fig. 78/2) into
the side panel from the outside and screw
on the side panel.
Do not use the (Fig. 78/3) washers.
Fig. 78
Always insert the flat head screws
into the side panel from the outside.
The reverse would cause the
permissible transport width of 3.00 m
to be exceeded.
This applies accordingly for 3.50 m
and 4.00 m implements.
6.4
Attaching the protective panels
The protective panels (Fig. 79/1) of the soil
tillage implement are available in two versions.
The suitable protective panels for the roller must
be attached to the soil tillage implement:
Protective panel (Fig. 79/2)
for all AMAZONE rollers,
except Cracker Disk roller (CDW)
Protective panel (Fig. 79/3)
for Cracker Disk roller (CDW).
Fig. 79
