Initial operation
106
KG / KX / KE BAH0063-6 04.16
6.9.1
Attaching lifting frame 2.1 (specialist workshop))
Fig. 87
1. Couple the tractor to the implement.
2. Park the implement on a firm surface.
3. Switch off the tractor PTO shaft, apply the tractor parking brake,
switch the tractor engine off and remove the ignition key.
4. Hook the lifting frame to a crane.
5. Peg the lifting frame at the lower pivot points. Secure the pin
(Fig. 87/1) with a screw (Fig. 87/2) and nut.
6. Position the upper link with a pin (Fig. 87/3) and secure with a
linch pin.
7. Connect the hydraulic lines to the hydraulic cylinder and secure
with cable ties.
8. Connect the hydraulic plug to a single-acting control unit (
green
)
on the tractor.
9. Instruct any people in the area to stand at a minimum distance
of 10.0 m from the implement.
10. Actuate the tractor control unit (
green
) in the tractor cab.
11. Check the lifting frame for correct operation and inspect it for
leaks.
