Number
Wheel mark eradicator
coulter
Operating conditions
Pulling force requirement
1
Wing coulter
Shallow loosening and levelling of
medium, silty soils
High pulling force
requirement
2
Heart-shaped coulter
Medium-depth loosening of various soils
Medium pulling force
requirement
3
Narrow coulter
Deep loosening of light soils
Low pulling force
requirement
CAUTION
Risk of injury from sharp edges on the
coulters and the bolt heads
Wear gloves.
Pay attention to sharp edges.
Do not allow carriage bolts to rotate.
1.
Remove the nuts
1
.
2.
Remove the bolts
1
.
3.
Install the desired wheel mark eradicator coulter
2
on the tool carrier.
4.
Install the bolts
3
.
5.
Install the nuts and tighten them.
6.
After 5 hours of operation, check the bolt
connection for tight fit.
1
2
3
CMS-I-00001080
6.3.5 Adjusting the scraper to the roller
The scrapers on the roller are set at the factory. The
scrapers can be adapted to the working conditions.
1.
Loosen the bolt
1
under the scraper.
2.
Move the scraper
2
in the elongated slot.
3.
To check the distance,
rotate the roller
2
.
4.
Tighten the bolt.
5.
Make the same setting for all scrapers.
1
2
CMS-I-00000933
CMS-T-00001534-B.1
6 | Preparing the machine
Preparing the implement for operation
MG6214-EN-II | E.1 | 17.05.2021
54
