6.3.3 Preparing the track marker for operation
6.3.3.1 Unfolding the track markers
The hydraulically actuated track markers produce
alternating marks. This mark serves as an reference
to the tractor driver for driving the next bout after
turning at the headland. The length and pitch of the
track markers are adjustable.
1.
Put the "yellow" tractor control unit in the neutral
position.
2.
Press the track marker
1
against the rubber
block.
The transport lock
2
is relieved.
3.
Swivel back the transport lock.
4.
The track markers are guided into the parking
position by the spring pressure.
Slowly swivel the track markers into the parking
position.
5.
Repeat the procedure for the opposite side of the
implement.
6.
Put the "yellow" tractor control unit in float
position.
The track marker folds into working position.
7.
If the wrong track marker is folded into working
position,
actuate the "yellow" tractor control unit.
The track marker is folded up.
8.
Put the "yellow" tractor control unit in float
position again.
The track marker on the opposite side folds into
working position.
CMS-I-00000952
CMS-T-00001725-D.1
CMS-T-00001561-C.1
6 | Preparing the machine
Preparing the implement for operation
MG6214-EN-II | E.1 | 17.05.2021
50
