6.3.3.2 Determining the track marker length
Working width of the
implement [m]
Distance A [m]
2.5
2.5
3.0
3.0
3.5
3.5
4.0
4.0
Read the distance
A
from the centre of the
implement to the track marker disc from the table.
A
CMS-I-00003078
6.3.3.3 Adjusting the track marker length
1.
Loosen the bolts
1
with the universal operating
tool
2.
Pull out the track marker disc
2
until the desired
distance is reached.
3.
Tighten the bolts with the universal operating tool.
4.
Make the same setting for the opposite side of the
implement.
5.
After 5 hours of operation, check the bolt
connection for tight fit.
-
+
1
2
CMS-I-00001074
CMS-T-00004725-B.1
CMS-T-00001487-C.1
6 | Preparing the machine
Preparing the implement for operation
MG6214-EN-II | E.1 | 17.05.2021
51
